be represented. The graduation of the ordinate is automatically
adjusted to the measured values supplied by the unit.
Figure 7-2: Measurement graphics
7.2.3
Creating a Measurement File
The actual measured values can be stored in a measurement file.
To do this, open the File menu, click on Open Logfile..., and
enter path and name. The file is stored with the file name exten-
sion ".log".
If another file of the same name exists, the system asks whether
that file shall be overwritten or the new measured data shall be
appended to the existing data.
7-4
DB-070 E
RadEye AB100
Pi/Ff 04.05.2021