Switching The Unit On - Thermo Scientific RadEye B20 Operating Instructions Manual

2.4

Switching the unit on

To switch on the RadEye B20, keep the ON button pressed for
at least one second. The sound generator (beeper) is initiated.
After switching the unit on, the RadEye B20 starts working
with the parameters previously selected (operation mode, cali-
bration factor, alarm thresholds etc.).
Battery voltage
The RadEye B20 starts working with the parameters previous-
ly selected (measuring unit, operation mode, calibration factor,
alarm thresholds etc.).
If the real time clock is set, actual time and date is displayed
for 3s.
The RadEye B20 first displays 0.00 cps. After the first detec-
tor pulse the measurement will be started.
RadEye B20/-ER
Iw/Tr/Ff 06.03.2017
Firmware version
DB-065 E
Calibration date
Checksum of the
firmware
2-7