Table of Contents
Advertisement
2.4
Switching the unit on
To switch on the RadEye PRD-ER, keep the „ON/▲" button
pressed for at least one second. The sound generator (beeper)
is initiated.
Battery
voltage
Display during switch on.
The RadEye PRD-ER starts working with the parameters pre-
viously selected (operation mode, calibration factor, alarm
threshold etc.)
If the real time clock is set, actual time and date is displayed
for 3s. The format is YYYY-MM-DD hh:mm.
RadEye PRD-ER
Iw/Tr/Ff 06.07.2015
Firmware
version
DB-066 E
Calibration date
Checksum of the
firmware
2-5
Advertisement
Table of Contents
