3.3
Scaler mode
To enter the Scaler mode select in the submenu "Operation
mode" the option "Scaler".
3.3.1
Mean value
The Scaler mode starts with the parameter set in submenu „Scaler
Parameter".
Preset time
Elapsed time
"▼"-Key toggles between
αβ and α threshold
To start the measurement, press the
measurement is in progress "Stop" is blinking.
Accumulated counts are limited to 99999 counts. "Accumulated
counts" is not displayed with selected option "Scaler netto". If
accumulated counts are greater than 99999, "#####" is displayed.
The absolute error is calculated as follows:
3-14
Measured
mean value
Action of
"Info/▲" key
"Info/▲"
DB-070 E
Accumulated
counts
Absolute error
key. While the
RadEye AB100
Pi/Ff 04.05.2021