Table of Contents
Advertisement
st
1
click
The ratemeter can be set to the actual value by pressing the
"Menu/◄" button for more than 2s.
3.2.1
Trend indication
A trend indication is given, if the measured count rate is increas-
ing or decreasing.
Increasing count rate
For accurate measurements, only readings without trend indica-
tion should be used.
A trend indication is not given at count rates of less than 1 cps.
3.2.2
Ratemeter Tau
This operation mode uses a single time constant instead of the
proprietary ADF for filtering the measurement value. The time
constant (Tau) be edited with menu item "Edit Tau" in sub menu
"Settings" (see 4.16).
RadEye AB100
Pi/Ff 04.05.2021
nd
2
Decreasing count rate
DB-070 E
click
3-13
Hide quick links:
Advertisement
Table of Contents
