Thermo Scientific RadEye AB100 Operating Instructions Manual page 18

If the real time clock is set, actual time and date is displayed
for 3s.
When the parameter set is selected, the corresponding high
voltage is set and the RadEye SX first displays 0.00 cps. After
the first detector pulse the measurement will be started. The
RadEye SX starts working with the parameters previously
selected (operation mode, calibration factor, alarm thresholds
etc.). The selected parameter set is displayed in the top line of
the LCD.
2-4 DB-070 E RadEye AB100
Pi/Ff 04.05.2021