2.4
Switching the unit on
To switch on the SENTINEL RadEye G, keep the ON button
pressed for at least one second. The sound generator (beeper)
is initiated.
Battery voltage
The SENTINEL RadEye G starts working with the parameters
previously selected (operation mode, calibration factor, alarm
thresholds etc.).
If the real time clock is set, actual time and date is displayed
for 3s.
2-8
DB-059-060324 E
Iw/Pi/Ff 30.07.2008
Firmware version
SENTINEL RadEye G
Calibration date
Checksum of the
firmware