Trim Side Cover Replacement - Precor Experience 700 Series Service Manual

Trim Side Cover Replacement

Trim Side Cover Replacement
ID
Removal Instructions
Repeat the removal procedure for both the left
1. Remove the hood cover, see
2. Remove the trim landing cover, see
3. Remove the trim end cap covers, see
page 97.
4. Remove the hood transition cover, see
page 86.
5. Starting from the front moving reward, use a standard flat blade screwdriver to
release (unsnap) the top of the trim side cover from five anchor mount clips. Hold
cover while releasing the upper anchor bracket clips and then pull down and away
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Trim Side Cover - left
Trim Side Cover - right
"Hood Cover Replacement" on
or right side trim covers.
"Covers and Panels Replacement" on
"Trim End Cap Covers Replacement" on
"Covers and Panels Replacement" on
6 Replacement Procedures
Covers and Panels Replacement
page 88.
page 86.
Page 101