Verify That There Are No New Error Codes - Precor Experience 700 Series Service Manual

Verify that there are no new error codes

After correcting the issue, reopen the Error Log and verify that there are no remaining active
error codes. This will verify that the original error codes are not recurring and that there are
no new error code issues. If the error code is recurring, the issue may be mileage related,
review the error code odometer history to verify if the error event is related to mileage inter-
vals.
Clear the Error Log, see
Note: If there is no logged error codes and the issue persists, you will need to use
observable and audible indicators to identify the source of the failure. Also make
sure that there are no related service bulletins that may resolve the issue. Browse
the list of available Troubleshooting procedures for related Troubleshooting
information.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Error Log & CPA Event Log" on
7 Troubleshooting
Basic Troubleshooting Steps
page 230.
Page 226