General Information; Features - Precor Experience 700 Series Service Manual

General Information

The following information provides general equipment and service information that will help
you to use this manual to properly repair and maintain the treadmill.

Features

The equipment operating specifications.
Feature
Consoles
Incline
Speed
Belt/Deck
Auto Stop
Drive Motor
1
voltage in an alternating current circuit
2
Alternating Current: electric current which periodically reverses direction between positive
and negative polarity.
3
Motor controller, motor controller unit, or motor controller module: used on treadmills, con-
tains the LPCA and motor controller functionality.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
LED consoles: P30, P30i and P31
Touchscreen consoles: P62 and P82
Elevation system generates up to 1000 lb / 453.6 kg of thrust and oper-
ated in compression for reliable operation.
Range: -3% to 15% in 0.5% increments.
Range: 0.0 - 16 mph in 0.5 increments (0 -25.7 kph) in 0.1 kph incre-
ments)
The treadmill supports two belt/deck options:
Forbo brand running belt with pre-waxed deck.
l
(The Forbo running belt must be used with a pre-waxed deck.)
Ammerall Beltech running belt with non-waxed deck.
l
(The Ammeraal Beltech running belt is a wax infused belt and
must NOT be used with a pre-waxed deck.)
Auto stop is a safety feature that shuts off a treadmill that has been
abandoned while the belt is running. Exclusive of the first sixty seconds
after a workout has begun or resumed, any 30 second window with no
user detected will prompt a 10 second countdown and then a full stop.
The detection is accomplished through software and is rated to detect
persons weighing 50 lbs (22.7kg) or greater walking with a normal
cadence.
The feature is selectable ON or OFF in the facility settings menus. It is
default from the factory set to ON, and it is recommended to be set ON.
1
1.5 kW, 230 VAC , 6.6 A , 3-phase
The motor controller
Specification
2
AC induction motor.
3
(MC ) implements Integrated Foot Plant Tech-
2 General Information
Features
Page 6