End Cap & Belt Guard Cover Replacement; About; Procedure - Precor GEN06 Series C952 Service Manual

End Cap & Belt Guard Cover Replacement

About

This procedure provides instruction to remove and replace the End Cap and belt guard cov-
ers.

Procedure

Review entire procedure before starting.
1. Switch the input power OFF and unplug power cord.
2. Remove the four screws (2 lower screws, each side) that retain the end cap. Keep
fasteners for installation. DO NOT loosen or move the Take Up Roller mount-
ing/adjustment bolts. Doing so will change the running belt's tension and alignment.
3. To remove the end cap, slide the end cap off of the treadmill.
(Undefined variable: TRM700-16Base.ServiceManualTitle)
5 Replacement Procedures
End Cap & Belt Guard Cover Replacement
46