Cleaning Procedure; Power Requirements; Equipment Power Requirements - Precor Experience 700 Series Service Manual

Consoles and
l
to one part water.

Cleaning Procedure

Generic cleaning procedure applicable to all Precor equipment:
TIP: There are many product specific PREVENTATIVE MAINTENANCE cleaning
videos available on the Precor Connect SERVICE VIDEOS web page. Log in to
your Precor Connect servicer account and select SERVICE VIDEOS, see
SERVICE VIDEOS.
1. Wipe down equipment using a soft lint-free cloth using only the recommended clean-
ing solution. Always spray cleaning solution directly onto the cleaning cloth and not
directly onto the equipment surface to avoid equipment damage due to excessive
moisture.
CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment
surfaces.
2. Rinse surfaces using a clean lint-free cloth dampened with water only.
3. Then completely dry with another clean lint-free cloth.

Power Requirements

Equipment Power Requirements

Electrical Recommendation for 120 V and 240 V Treadmills.
Note: This is a recommendation only. NEC (National Electric Code) guidelines or
local region electric codes must be followed.
The facility must provide a good quality stable power signal (not fluctuating or intermittent)
per the OEM power requirements to insure best performance and trouble free operation.
Power Specification
Nominal 120 VAC models
l
Operating voltage: 90 VAC to 132 VAC.
o
AC frequency range: 47 - 65
o
1
Personal Viewing System display.
2
The hertz (symbol: Hz) is the derived unit of frequency in the International System of Units
(SI) and is defined as one cycle per second.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
PVS displays: a diluted solution of one part 91% Isopropyl alcohol
Hz
2
2 General Information
Cleaning Procedure
Page 16