Common Frame Drive Roller - Precor Experience 700 Series Service Manual

Common Frame Drive Roller

There are two common frame drive rollers, one for the TRM600 and another for the
TRM700/800 treadmills. The TRM600 treadmill uses a smaller diameter drive roller and not
compatible with the TRM700/800 treadmills. The TRM700 and TRM800 use the same drive
roller.
Both the TRM600 and TRM700/800 drive rollers use the same common frame mounting
system. One end of the roller shaft is a pin that slides into a frame pin mounting hole. The
other end of the shaft is milled to set into a frame mounted bracket. On TRM600 models, the
shaft bracket mount is on the left side of the roller and the shaft pin mount is on the right
side. On TRM700/800 models the frame roller mounts are switched, the shaft bracket
mount is on the right side of the roller and the shaft pin mount is on the left side.
TRM600 Drive Roller
TRM600 Drive Roller
TRM700/800 Drive Roller
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
9 Theory of Operation
TRM600/700/800 Common Frame Overview
Page 287