Error Log - Precor Experience 700 Series Service Manual

Note: Multiple repeating instances of the same error code event occurring during
the same hour or odometer reading will only be logged as a single error code
event.
Troubleshooting
Always review the Error Log or CPA Event Log when troubleshooting an issue. The error
logs will contain all current and past error codes from the last log reset. You can then refer to
the Error Code Troubleshooting Guide
the error code and information to help resolve the issue.
Note: Be aware that not all machine failures will cause an error code event. Use
physical observation and mechanical troubleshooting skills to resolve non error
code issues.

Error Log

Applies To: LED Consoles (P10, P30, P30i and P31)
Contents
About, see "About" below
l
How to open the Error Log, see
l
Clearing Error Log Codes, see
l
About
On LED consoles (P10, P30, P30i and P31), error codes are stored in the Error Log. Error
codes are sequentially shown on the console message display one at a time. The individual
error code data metrics will scroll across the display. Use the Up/Down keys to scroll thru
and view the individual error codes.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
(Error Code Troubleshooting
"How to open the Error Log:" on the next page
"Clearing Error Codes:" on page 233
7 Troubleshooting
Error Log & CPA Event Log
Guide) to learn about
Page 231