Precor Experience 700 Series Service Manual page 163

measured distances are the same
CAUTION: A misaligned drive belt can cause high pitch belt noises, damage to the
belt, and possible drive motor pulley or drive roller pulley hardware damage.
5. Tension the drive belt to specification per the Common Frame: Drive Belt
Tension and Alignment procedure, see
Alignment" on page 61.
Drive Belt
(1)
Condition
(1)
New
(1)
Used
(1) New belt tension applies to new belt first time installations. Used belt tension
applies to reinstalling an existing belt or re-tensioning an existing used belt.
6. Complete the running belt installation by verifying the running belt alignment and
tracking, see "Running Belt Tension and Tracking Adjustment" on
7. Reinstall the hood cover, see
8. Do the Operation Verification tests (see
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Common Frame Drive Belt Tension and
Drive Belt
Tension
110 lbs +/- 10 (50 kgs +/- 4.5)
85 lbs +/- 5 (39 kgs +/- 2)
"Hood Cover Replacement" on
"Operation Verification" on
6 Replacement Procedures
Drive Belt Replacement
Verification Belt Tension
100-120 lbs (45-54 kgs)
80-90 lbs (36-41 kgs)
page 67.
page 88.
page 24) and
Page 153