Touchscreen Display Calibration Shortcut - Precor Experience 700 Series Service Manual

Steps
1. Make sure the console is set to the Welcome banner.
2. Press and hold the VOL down key while pressing CH up >CH down > CH down >
CH up:
3. At the Sign-In screen, type in the service access code.

Touchscreen Display Calibration shortcut

Console shortcut to access the Touchscreen Calibration test.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
4 Standard Service Menus
How to Access the Standard Service Menus
Page 32