Lift Platform Replacement
About
This procedure provides instruction to remove and replace the Lift Platform.
Procedure
Removal Instructions
Review entire procedure before starting.
1. Remove the hood cover, see
2. Remove the left/right trim landing covers, see
on
page 91.
3. Remove the left and right trim side covers see
page 86.
4. Prepare the treadmill for service. This procedure gains access to the lift platform from
the front of the treadmill. However you can alternatively access the lift platform by lay-
ing the treadmill on its side, see
a. Access the service menu (51765761) and select INCLINE TEST. Use the
incline control to set the incline level to 14.
b. Securely and safely place supports (e.g. car jack stands) under the left and
right front corners of the frame weldment.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Hood Cover Replacement" on
"Trim Landing Covers Replacement"
"Covers and Panels Replacement" on
Side
access.
6 Replacement Procedures
Lift Platform Replacement
page 88.
Page 212