Trim End Cap Covers Replacement - Precor Experience 700 Series Service Manual

Trim End Cap Covers Replacement

Trim End Cap Covers Replacement
Legacy Frame Models
ID
Removal Instructions
Repeat procedure for both the left
1. Remove the hood cover, see
2. Remove the left and right trim landing covers, see
on page 86.
3. Remove the three #3 Phillips left
One fastener on the top, one fastener on the end, and one fastener on the bottom.
Retain part(s) and/or fastener(s) for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Trim End Cap - left
Trim End Cap - right
and right
"Hood Cover Replacement" on
and right
6 Replacement Procedures
Covers and Panels Replacement
end cap covers.
page 88.
"Covers and Panels Replacement"
trim end cap cover fastener screws.
Page 97