Motor - GRAPHTEC FC 4500 Series Service Manual

6.25 X Motor
How to detach the X Motor
(1) Open the Bottom Chassis (See section 6.2.).
(2) Disconnect the X Motor Cables from the Main Board.
(3) Detach the Corner Cover 50L (See section 6.6.).
(4) Detach the Corner Cover B (See section 6.7.).
(5) Detach the Panel L (See section 6.11.).
(6) Detach the Interface Cover (See section 6.13.).
(7) Remove the three M4L8 TP head screws and the two M4L8 binding head screws holding the Motor
Reinforcement Bracket, and then detach the Motor Reinforcement Bracket.
FC4500-UM-251-9370
Main Board
X Motor Cables
M4L8 TP head screw
Motor Reinforcement Bracket
M4L8 binding head screw
47
6 REPLACEMENT PROCEDURES