GRAPHTEC FC 4500 Series Service Manual page 94

Pasting Position for the FC4510-60
X direction of measuring tape
(1) Paste the 0 of measuring tape on the position of 13 mm from the left side edge of writing panel along
the X-axis, and align the measuring tape vertically to the bottom edge of writing panel.
Righrt edge of Panel L
Y direction of Measuring tape
Y direction of measuring tape
(1) Paste the 0 of measuring tape on the position of 30 mm from the bottom of honeycomb plate edge,
and align the measuring tape vertically along the 5 mm from the edge of Panel L.
FC4500-UM-251-9370
Left edge of writng panel
X direction of Measuring tape
Bottom edge of writng panel
88
6 REPLACEMENT PROCEDURES