Pen Board - GRAPHTEC FC 4500 Series Service Manual

6.20 Pen Board

How to detach the Pen Board
(1) Detach the Y Rail Cover (See section 6.3.).
(2) Detach the Pen Block Cover (See section 6.17.).
(3) Disconnect the Registration Mark Sensor Cable from the Pen Board.
(4) Disconnect the Pen Flexible Cable(s) from the Pen Board.
(5) Disconnect the Y Flexible Cable from the Pen Board.
FC4500-50 / FC4500-60
Pen flexible Cable
FC4510-60
Pen flexible Cable
(6) Remove the two M3L6 binding head screws holding the Pen Board, and then detach the Pen Board
from the Y slider.
FC4500-UM-251-9370
Pen board
Registration Mark Sensor Cable
Pen board
Registration Mark Sensor Cable
Registration Mark Sensor Cable
37
6 REPLACEMENT PROCEDURES
Y flexible Cable
M3L6 binding head screw
Y flexible Cable