Table of Contents
Advertisement
7.4
NoVRAM-Clear (Resetting the values of main board)
The all adjustment values are cleared when the NovRAM-Clear was performed.
Therefore all electrical adjustments need to perform after the NovRAM-Clear was performed.
The type of model is set during performing the NovRAM-Clear.
Therefore the NovRAM-Clear have to be performed to set the correct type of model when the main board
was replaced to new main board.
How to perform the NoVRAM-Clear
(1) Turn off the power for the FC4500 if the power is on.
(2) Set the DIP switch setting to the following setting on the main board.
(3) Turn on power for the FC4500.
(4) The following menu is displayed on the LCD.
(5) When the following menu is displayed on the LCD, select the correct type of model by using the
or the
keys.
The following models can be selected.
FC4500-50** (Select this model to the FC4550-50 also.)
FC4500-60**
FC4510-60****
(6) Press the ENTER key to set the type of model.
(7) The following menu is displayed.
(8) Select the STD by using the
(9) Press the ENTER key to set the suffix of standard model.
FC4500-UM-251-9370
1
2 3 4 5 6 7 8
FORCE
F1
NOVRAM CLEAR START
F2
SPEED
FORCE
F1
SELECT MODEL
FC4500-50**
F2
SPEED
FORCE
F1
SET SUFFIX
STD[V*.**]
F2
SPEED
or
key.
ON
OFF
OFFSET
QUALITY
OFFSET
QUALITY
OFFSET
QUALITY
94
7 ELECTRICAL SECTION
F3
F4
F3
F4
F3
F4
Advertisement
Table of Contents
