Introduction; Notes On This Manual; Registered Trademarks; Copyright - GRAPHTEC CELITE-50 User Manual

Cutting plotter

Table of Contents

Thank you for purchasing Cutting Plotter CE LITE-50. This device is a cutting plotter that realizes high-speed

and high-precision work. In addition to cutting marking films, this device can also be used as a pen plotter.

Please carefully read through this manual prior to use in order to ensure safe and proper use of the device.

This product is manufactured and sold under license from Gerber Scientific Products, Inc. for US Patent No.

5,537,135 and its foreign patents.

(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, without the prior written permission of Graphtec Corporation.

(2) The product specifications and other information in this manual are subject to change without notice.

(3) While every effort has been made to provide complete and accurate information, please contact your sales

representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish to make

other comments or suggestions.

(4) Not with standing the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability

for damages resulting from either the use of the information contained herein or the use of the product.

All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or

registered trademarks of their respective companies.

This User's Manual is copyrighted by Graphtec Corporation.

Introduction

Table of Contents

Do you have a question about the CELITE-50 and is the answer not in the manual?