Introduction
Stand alone operation
In Stand alone operation, the ST60 Wind instrument is connected only
to the relevant transducer and does not display information from, or
provide information to, any other instruments.
Note: The ST60 Close Hauled Wind instrument operates only as a
SeaTalk repeater. It cannot be connected directly to a wind transducer.
Remote control
When connected to SeaTalk, the ST60 Wind and Close Hauled Wind
instruments can be controlled remotely by a SeaTalk Remote Keypad
Unit, to provide instant remote access to the various display readouts.
Mounting options
If you do not want to surface mount your ST60 instrument, options are
available for:
• Flush mounting. If you have ordered the flush mounting option a
• Bracket mounting.
low-profile bezel and four fixing screws are also provided.
vii