Chapter 2: St290 Graphic Display; Introduction; Chapter And Page Selection Options; Available Information - Raymarine ST290 Owner's Handbook Manual

81183_2 S2.book Page 1 Tuesday, May 6, 2003 8:39 AM

Chapter 2: ST290 Graphic Display

2.1 Introduction

The ST290 Graphic Display uses a dot matrix display to show informa-
tion in a range of different formats.
Figure 2-1: Typical Graphic Display

Chapter and page selection options

You can use either of the following options to select chapters and pages:
•
•
Use the procedures in Section 7, System Setup to set the required option.

Available information

The information you can see on your instrument depends on which
profile is selected and on which transducers are fitted to your boat.
The chapter and page structures of the Full, Sail and Power operating
profiles for the Graphic Displays are shown in diagrams at the end of this
ST290 Instrument System Owner's Handbook
Menus option (option 1). When you press the
Normal operation, a menu of available chapters is displayed, and you
highlight the chapter you want. A subsequent press of the
displays the pages of the selected chapter as menu items. This is
probably the best option for people with limited experience of
operating marine instruments.
Pop-up option (option 2). When you press the
normal operation, the current chapter name is displayed as a pop-up.
This option is suitable for people with some previous experience of
Raymarine instruments (e.g. ST80).
D5694-1
button during
button during
2-2-1
button