Display Calibration; Rudd Bar Screen; Hdg Screen; Data Pages - Raymarine SPX-5 Installation & Setup Manual

Chapter 4: SPX-5 Wheel system settings

4.2 Display calibration

Display calibration provides settings to adjust the information displayed on the Pilot
Controller.
Accessing Display
Calibration
Display Calibration

RUDD BAR screen

This screen gives you access to the other Display calibration screens.

HDG screen

You can choose whether to use magnetic or true heading data values. The options
are:
• HDG MAG - Magnetic heading. If you select this, the screen will indicate MAG for
heading values, during normal operation.
• HDG TRUE - True heading. If you select this the screen will indicate TRUE for
heading values, during normal operation.

Data pages

The Pilot Controller has fifteen user-configurable data pages. Each data page can be
configured to display SeaTalk/NMEA data, which can be viewed during normal
operation (see SmartPilot-X5 Wheel system Operating Guide ).
The RUDD BAR parameters are
adjustable only if the rudder
reference transducer option is fitted
Data pages
Press disp
for next page
2 seconds
(save changes)
To adjust values
or
or
D10602-1
47