KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 96

Step 51: Attach Hand Grips
A: Place 1 Hand Grip over the existing holes in (0602) Short Side Trim, making sure that it's centered and flush
to the edges. Pre-drill with a 1/8: (3.2mm) drill bit and attach Hand Grip with 2 (LS2) 1/4 x 2-1/2" Lag Screws
(with flat washers). (fig. 51.1 and 51.2)
B: Repeat step to install a second Hand Grip on the other side.
Fig. 51.1
LS2
1/4 x 2-1/2" Lag Screw
w/ flat washer
X4
centred on face and
flush to edge of Side Trim,
both sides
Hardware
4 x ¼ x 2-1/2" Lag Screws (FW1)
LS2
96
Fig. 51.2
0601
per side
FW1
LS2
Steel Hand Grip
LS2
FW1
centred on face and
flush to edge of Side Trim,
Side Trim
both sides
15.9 x 76.2 x 515mm
Short Trim
15.9 x 76.2 x 402mm
Other Parts
2 x Steel Hand Grip