KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 120

Step 68: Sand and Water Table Assembly
Part 2
D: Place 1 (6027) Sand Water Support against the opposite ends of the (6011) Box Sides so that the inside pre-
drilled holes line up. Attach using 4 (S4) #8 x 3" Wood Screws. (Fig.68.3 & 68.4)
E: Install 1 (8834) Gusset per side so that the short angle is flush to the (6015) Box Legs and the long angles are
flush to the (6011) Box Sides. Attach using 1 (S15) #8 x 1-3/4" Wood Screw and 1 (S4) 8 x 3" Wood Screw per
side. (Fig.68.3 & 68.4)
S4
Wood Parts
6027
2 x Box Gusset 15/16 x 3-1/4 x 8-1/2"
8834
Fig. 68.3
S4
S15
6027
S15
S4
S15
Fig. 68.4
6011
Hardware
8 x #8 x 3" Wood Screw
S4
4 x #8 x 1-3/4" Wood Screw
S15
120
S4
6004
8834
8832
6015
8834