KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 86

Step 44: Wall Top Assembly
Part 1
A: Making sure that assemblies are square, position the Left Wall Assembly onto the lower left assembly as
shown in (fig. 44.1 & 44.2). Attach (6002) Long Post to (6012) Short Post using 1 (H12) 1/4 x 3" Hex Bolt (with
lock washer, flat washer and t-nut). In the upper hole of (6026) Rock Rail, pre-drill with a 1/8" (3.2mm) drill bit
and install 1 (LS3) 1/4 x 3" Lag Bolt (with flat washer). Install 1 (H3) 1/4 x 2-1/2" Hex Bolt (with flat washer, lock
washer and t-nut) in the (6000) Upper Post. (fig. 44.1 & 44.2)
Fig. 44.1
6000
6026
FW1
LW1
H3
FW1
LS3
TN1
Fig. 44.2
6000
6026
Hardware
1 x 1/4 x 3" Hex Bolt (LW1, FW1, TN1)
H12
1 x ¼ x 3" Lag Bolt (FW1)
LS3
1 x ¼ x 2-1/2" Hex Bolt (LW1, FW1, TN1)
H3
86
Left Wall Top
6012
TN1
FW1
LW1
H12
6002