KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 91

Step 47: Attach Tarp Frame
Part 1
A: Place 1 (6024) Tarp End on either side of the (6023) Roof Sides as shown in (Fig. 47.1 & 47.2). Pre-drill with a
1/8" (3.2mm) drill bit and attach from the outside using 4 (S20) #8 x 1-3/8" Wood Screws per side.
B: On each inside corner attach a Corner Bracket to the (6024) Tarp Ends and (6023) Roof Sides using 3 (S37)
#7 x 5/8" Pan Screws per bracket. (Fig. 47.1 & 47.2)
Fig. 47.1
Wood Parts
2 x Tarp End 5/8 x 3-1/4 x 35-1/2"
6024
6024
6023
S20
x 2 per side
Hardware
12 x #7 x 5/8" Pan Screws
S37
8 x #8 x 1-3/8" Wood Screws
S20
91
Fig. 47.2
6024
S20
S37
x 3 per
bracket
Other Parts
4 x Corner bracket
6023
bracket