KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 128

Step 73: Slide Section Assemblies
Part 2
Note: When installing Pan Bolts make sure to look at holes so bolts go through the side with the round
recess and the lock nuts go through the side with the hexagonal recess. (Fig. 73.3)
D: Attach TNR2 Slide Exit Top and the remaining TNR2 Slide Elbow together using 8 (PB1) 1/4 x 3/4" Pan Bolts
(with lock nut) as shown in (Fig. 73.4). It is very important to attach bolts as indicated. This creates the Exit
Elbow Assembly.
Fig. 73.4
PB1
TNR2
Slide
Elbow
Fig. 73.3
PB1
8 x
TNR2
Slide Exit
Top
LN1
Hardware
1/4 x 3/4" Pan Bolt (LN1)
PB1
128
PB1
LN1
PB1
LN1
Other Parts
1 x TNR2 Slide Exit Top
1 x TNR2 Slide Elbow