KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 107

Step 61: Attach Tunnel Assembly Frame to Fort
Part 1
Note: Move Adventure Tower to final location
A: With a helper, lift the tunnel assembly frame so that it fits between the Adventure Tower and the Fort as shown
in fig. 61.1.
B: From inside the Adventure Tower attach the (6035) Tunnel Side Joists to the Wall Supports using 4 (S4) #8 x 3"
Wood Screws. (fig. 61.1 and 61.2)
C: Repeat Step B for the fort side.
D: From outside the assembly pre drill 1/8" holes and attach the Swing Brackets to the Tower and Fort frames
using 1 (WL3) ¼ x 1-3/8" Wafer Lag (with flat washer) per bracket. (fig. 61.1 and 61.3)
Fig. 61.2
Fig. 61.1
#8 x 3" WS x8
S4
8 x
S4
4 x
WL3
1/4 x 1-3/8" Wafer Lag x4
Hardware
8 x 3" Wood Screw
1/4 x 1-3/8" Wafer Lag (FW1)
107
#8 x 3" WS x8
Fig. 61.3
WL3
FW1
1/4 x 1-3/8" Wafer Lag x4
#8 x 3" WS x
A