KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 26

Step 3: Join Frame Assemblies
Part 4
E: On the Back Wall, from inside the
assembly, tight to (2622) End Panel
Assembly, halfway up the assembly attach 1
(2610) Side Joist, 5/8" down from the panel
floor, to (2677) Narrow Panel and (2618)
Front Back Panel with 2 (H11) 1/4 x 2-3/4"
Hex Bolts (with lock washer, flat washer
and t-nut). Bolts are installed from inside
the assembly. Make sure (2610) Side Joist
is level then attach with 4 (S3) #8 x 2-1/2"
Wood Screws. (fig. 3.6 and 3.7)
F: Tight to (2610) Side Joist attach (2794)
Joist, 5/8" down from the panel floor, to
(2618) Front Back Panel and (2677) Narrow
Panel with 2 (H11) 1/4 x 2-3/4" Hex Bolts
(with lock washer, flat washer and t-nut).
Bolts are installed from inside the assembly.
Make sure (2794) Joist is level and flush to
the top of (2610) Side Joist then attach with
5 (S3) #8 x 2-1/2" Wood Screws. (fig. 3.6
and 3.7)
G: Repeat E and F for the Front Wall
making sure to position (2794) Joist so it is
opposite to the back wall. Notice screw and
bolt locations. (fig. 3.6 and 3.7)
Fig. 3.7
2677
5/8"
2622
Wood Parts
2 x Side Joist 2 x 2 x 40-1/4"
2610
2 x Joist 2 x 2 x 44-3/8"
2794
2618
2677
2610
2794
2610
LW1
(hidden)
H11
FW1
TN1
2677
18 x
S3
8 x
H11
Fig. 3.6
Top View
2677
2794
Back
2618
S3
2610
2677
Tight
2618
Hardware
#8 x 2-1/2" Wood Screw
1/4 x 2-3/4" Hex Bolt
(LW1, FW1, TN1)
26
S3
H11
S3
H11
S3
S3
H11
S3
2622
2794
(hidden)
2677
2627
2677
2794
Front
2618
2610
2677
Tight