KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 137

Step 79: Attach TNR Brace Assembly
A: Use (8965) TNR Upright as a guide to judge the proper bolt location, remove the bottom pan bolt and nut.
The bolt will no longer be needed, but keep the lock nut. (fig. 79.1 and 79.2)
B: Attach the top of the TNR3 Post Mount to TNR2 Slide Clamp Ring using 1 (PB2) 1/4 x 1-1/4" Pan Bolt (with
the previously removed TN1 lock nut and 1 FW1 flat washer). (fig. 79.2)
C: Insert TNR3 Post Mount on (8965) TNR Upright, pre-drill with a 1/8" (3.2mm) drill bit then attach with 2 (S6)
#12 x 1" Pan Screws. (fig. 79.2)
D: Attach (8963) TNR Ground Brace flush to the bottom of (6002) Long Post with 2 (S11) #8 x 2" Wood Screws
and 1 (S4) #8 x 3" Wood Screw. (fig. 79.1 and 79.3)
Fig. 79.1
6002
Remove PB1 (Pan Bolt)
first then install PB2
(Pan Bolt with previously
removed LN1 lock nut)
8965
TNR Brace
Assembly
Hardware
1 x 1/4 x 1-1/4" Pan Bolt
PB2
1 - (FW1 flat washer, LN1 lock nut - previously removed)
2 x #12 x 1" Pan Screw
S6
1 x #8 x 3" Wood Screw
S4
2 x #8 x 2" Wood Screw
S11
Fig. 79.2
TNR2 Slide
Clamp Ring
PB2
Fig. 79.3
S11
137
LN1
FW1
8965
S6
6021
S4
Other Parts
1 x TNR3 Post Mount
TNR3 Post
Mount
8963