KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 142

Step 84: Glider Assembly
A: Attach 1 Space Glider Handle to the Space Glider Body using 1 (G25) 5/16 x 7-1/4" Hex Bolt (with 2 flat
washers and 1 lock nut). Repeat for the second Space Glider Handle. (fig. 84.1)
B: Install 2 Glider Rope with Chains into each Space Glider Handle using 2 - 5/16" Flat Washers and 1 Lock
Nut per rope. (fig. 84.1)
Fig. 84.1
Space Glider
Body
Warning! Bolt must not exceed
1/2 thread past the nut
FW2
LN2
G25
Hardware
2 x 5/16 x 7-1/4" Hex Bolt
G25
(FW2 x 2, LN2)
8 x 5/16" FW2
4 x 5/16" LN2
Glider Rope
and Chain
Space Glider Handle
142
FW2
LN2
FW2
LN2
Other Parts
2 x Space Glider Handle
1 x Space Glider Body
1 x Glider Rope and Chain (pkg of 4)