KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 93

Step 48: Attach Tower Canopy
A: Place Tower Canopy over (6025) Tarp Support making sure bottom edges of Tower Canopy are even on both
sides of assembly.(Fig. 48.1)
B: Secure one side by attaching Tower Canopy to 1 (6024) Tarp End using 5 (S37) #7 x 5/8" Pan Screws (with #8
flat washer). (Fig. 48.1)
C: Make sure the Tower Canopy is smooth and tight and then secure to the remaining (6024) Tarp End using 5
(S37) #7 x 5/8" Pan Screws (with #8 flat washer). (Fig. 48.1)
D: Attach Tower Canopy to each end of the (6025) Tarp Support using 2 (S37) #7 x 5/8" Pan Screws (with #8 flat
washer).(Fig. 48.1)
Fig. 48.1
Tarp Support
38.1 x 38.1 x 901.7mm
6025
Canopy
x 5 per side
S37
Hardware
12 x #7 x 5/8" Pan Screws (FW3)
S37
Tarp Support
38.1 x 38.1 x 901.7mm
S37
FW3
93
Tower Canopy
889 x 117.6mm
S5
#8 x 1/2" Pan Screw
w flat washer
X12
Tower Canopy
889 x 117.6mm
Canopy
FW3
S37
6024
Other Parts
1 x Tower Canopy