KidKraft Cedar Summit BEAR CAVE LODGE FSC Installation And Operating Instructions Manual page 34

Step 8: Attach Swing End to Swing Beam
A: Place Swing End Assembly against Swing Beam Assembly then place 1 Beam Bracket on each side of the
assembly (they are specific for left and right side) and attach with 5 (G21) 5/16 x 3-3/4" Hex Bolts (with 2 flat
washers and 1 lock nut). (fig. 8.1 and 8.2)
Fig. 8.1
Swing End
Assembly
LN2
FW2
Swing End
Assembly
Hardware
5 x 5/16 x 3-3/4" Hex Bolt (FW2 x 2, LN2)
G21
34
Swing Beam
Assembly
Fig. 8.2
Beam
Bracket
Swing Beam
Assembly
G21
Other Parts
1 x 3200143 (2pk)