GE LOGIQ E9 Service Manual page 643

GE
D 5573152-100, R
IRECTION
Section 9-9
Table 9-25
New P/N
GA200946
5954000
LOGIQ E9 XYZ
Motor Controller
5429346
LOGIQ E9 XYZ
Motor Controller
5440179
LOGIQ E9 XYZ
Motor Controller
5440179-3
GA200952
5393698
NOTE: LOGIQ E9 console models 5205000-4 and earlier:
It is recommended to have the system running R2.0.4 or later Application Software and the XY USB
Cable installed to allow the system to release the XY Brakes at shutdown if the console is not locked.
If replacing the new FRUs on a system that is not running R2.0.4 or later, order the Late Request Plan
for FMI 70206 - R2.0.4 Software Upgrade and XYZ USB Cable Update in SN70443A - Closed FMIs on
LOGIQ™ E9, LOGIQ™ 9 and LOGIQ™ 700 Consoles.
. 2
EV
XYZ Mechanism parts
XY Mech Brakes and Brake Motor FRUs Compatibility Chart
Description Replaces
XY
GA200036
Mechanism
XY
Mechanism GA200946
(USA Mfg.)
GA200644
with O-ring GA200795
Detection
5429346
with O-ring
Detection
5440179
with O-ring
Detection
GA200535
XY Brake
Mechanism
GA200952
Assembly
(USA Mfg.)
Chapter 9 Renewal Parts
(cont'd)
Compatibility
If replacing this part, it is recommended for better
Backward
performance to check the installed XYZ Motor
compatible
Controller and update it to 5429346 if 5429346 is
not installed yet.
Substitute for GA200946. If replacing this part, it is
Backward
recommended for better performance to check the
compatible
installed XYZ Motor Controller and update it to
5429346 if 5429346 is not installed yet.
Only compatible
with P/N GA200946 -
XY Arm Assembly,
and P/N GA200952 -
XY brake Motor
Assembly
Use this FRU if the LCD Arm and Monitor are the
Supports new LCD
new version for R4.x and later, due to the changes
Monitor introduced
in weight of the new LCD Arm and Monitor.
with R4.x and later
consoles
The 5440179-3 can be used with R3 SW; it will fail
Supports new LCD
Rev test Diag, since the software cannot read the
Monitor introduced
rev format on this new part, but it does not prevent
with R4.x consoles
it from operating properly.
If replacing this part, it is recommended for better
performance to check the installed XYZ Motor
Controller and update it to 5429346 if 5429346 is
Backward
not installed yet.
compatible
NOTE: 5429346 is ONLY compatible with
P/N GA200946 XY Mech.
If replacing this part, it is recommended for better
performance to check the installed XYZ Motor
Controller and update it to 5429346 if 5429346 is
Backward
not installed yet.
compatible
NOTE: 5429346 is ONLY compatible with
P/N GA200946 and 5954000 XY Mech.
LOGIQ E9 S
ERVICE
Solution / Comments
N/A
M
ANUAL
9 - 49