Purpose Of This Section - GE LOGIQ E9 Service Manual

GE
D 5573152-100, R
IRECTION
Section 8-8
Casters and Brakes replacement
8-8-1

Purpose of this section

This section describes how to replace the replaceable parts for the Casters and Brakes.
8-8-2 Rear Casters replacement
8-8-2-1 Manpower
Two people, 15 minutes.
8-8-2-2 Tools
For tools needed, refer to:
NOTE: This procedure requires an extended HEX key (UNBRAKO / ALLEN key) due to the high torque:
130 Nm {95.9 lbf-ft}.
8-8-2-3 Preparations
When preparing for the replacement, you must perform the following steps:
1.) Power down the system
2.) Disconnect the mains power cable from the wall outlet.
3.) Disconnect all Probes and External I/O Cabling.
4.) Remove both Side Covers.
5.) Remove the Rear Bumper.
6.) Remove the Rear Cover.
Follow these links if you need more information:
• 4-2-3 "Power shut down" on page 4-6.
• 8-5-3 "Side Covers replacement" on page 8-28.
• 8-5-15 "Rear Bumper replacement" on page 8-61.
• 8-5-12 "Rear Cover replacement" on page 8-51.
. 2
EV
8-2-5 "Tools needed for servicing the LOGIQ E9" on page
Chapter 8 Replacement procedures
LOGIQ E9 S M
ERVICE ANUAL
8-5.
8 - 201