GE LOGIQ E9 Service Manual page 366

GE
D 5573152-100, R
IRECTION
8-5-22-1 Bulkhead Cover removal
Table 8-54
1. At the rear of the system, release the
LOGIQ E9 frogleg mechanism by inserting
a screwdriver into the release point and
pressing until release. Pull the console out
to its extended position to gain access to
the screws in the next step.
2.
Use thumbs to press upper lock tabs
toward the front of the system to release
the top of the Bulkhead Cover.
8 - 82
. 2
EV
Bulkhead Cover removal
Steps
Section 8-5 - Replacing Covers and Bumpers
LOGIQ E9 S
Corresponding Graphic
XY / Frogleg mechanism release
Bulkhead Cover
Upper lock tabs (placement on Bulkhead Cover)
M
ERVICE ANUAL