GE LOGIQ E9 Service Manual page 411

GE
D 5573152-100, R
IRECTION
8-6-4-1 V2 Monitor Arm Assembly Adapter removal
Table 8-79
1.
Remove the Bulkhead Cover.
2.
Disconnect the LCD cables; video (P10)
and power (P3) from the LCD.
The Video Cable has a retainer and screw.
Loosen the screw with a small, flat blade
screwdriver.
Disconnect the Power Cable (P2), the
HDMI (P10) and the USB (P3) from the
Bulkhead Board.
. 2
EV
V2 Monitor Arm Assembly Adapter removal
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
Corresponding Graphic
R4 shown
Monitor Cables to Bulkhead
23 inch - R6 and later
M
ERVICE ANUAL
8 - 127