GE LOGIQ E9 Service Manual page 375

GE
D 5573152-100, R
IRECTION
8-6-2-3 LCD Monitor V2 removal - R4.x
A cover at the rear side of the LCD Monitor assembly covers the cable to the monitor. To get access to
the cable connector, remove the Cable Cover.
Table 8-61
1.
Remove the LCD Cable Cover fixing
screws.
2.
The LCD Cable to LCD is secured to the
LCD with a retaining screw (1), an EMC
shielded retainer (2) and two Phillips
screws (3).
Remove the screws and retainer.
Disconnect the Cable from the LCD.
. 2
EV
LCD Monitor V2 removal - R4.x
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
ERVICE
Corresponding Graphic
M
ANUAL
8 - 91