GE LOGIQ E9 Service Manual page 381

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5573152-100, R

For 19 inch Monitor:

The Cable to the monitor is secured with a

retaining screw (1), an EMC shielded

retainer (2) and two Phillips screws (3).

Remove the screws and retainer.

NOTE: Not all R5 LOGIQ E9 consoles used

this retainer.

Disconnect the Cable from the LCD.

For 23 inch and OLED Monitor:

Disconnect the HDMI (4), the USB (5) and

the Power (6) Cables from the Monitor.

If the LOGIQ E9 has the Optional USB

Microphone, remove it to transfer to the

replacement Monitor.

Monitor removal - R5.x and later (Ergotron Arm)

Chapter 8 Replacement procedures

Corresponding Graphic

LCD Cable to LCD - R5

23 inch - R6 and later

OLED - R6 and later