GE LOGIQ E9 Service Manual page 393

GE
D 5573152-100, R
IRECTION
8-6-3-1 LCD Arm (Original) replacement - R3.x and earlier
Table 8-70
1. Disconnect the LCD cables; video (P10)
and power (P3) from the connectors on the
Bulkhead. The Gel Warmer cable (P1)
does not have to be removed.
2. Push the LCD Mount Lock handle (1) into
the unlocked position (shown LOCKED).
DO NOT loosen nut (2).
Move the LCD Arm from side to side when
at the same time pulling upwards, until you
can lift LCD Arm assembly away.
. 2
EV
LCD Arm assembly (Original) removal
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
ERVICE
Corresponding Graphic
LCD Cables at Bulkhead
LCD Mount Lock Handle
M
ANUAL
8 - 109