GE LOGIQ E9 Service Manual page 571

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5573152-100, R

Table 8-177 Capacitor Pack removal

Unlatch the two latches (1) that clamp the

Capacitor Pack to the top of the BEP (2).

Tilt the Main Console Front Cover forward

just until the lower Column Cover stop tabs

(3) clear and slide the Shear Wave Console

Cover Assembly (4) out.

Lift the Column Cover Assembly.

Push the Capacitor Pack toward the Card

Cage approximately 1/2 inch to free the

Pack the BEP.

Remove the Capacitor Pack.

Capacitor Pack installation

Table 8-178 Capacitor Pack Installation

Place the Capacitor Pack on top of the

Reconnect the power cable from the Main

Power Supply to the Pack BCM1 and

BCM2. Power Cable is labeled.

Chapter 8 Replacement procedures

Corresponding Graphic