Brainlab CURVE DUAL System User's Manual page 95

USING THE SYSTEM
How to Remove
Sterile Touchpen
from Packaging
Steps
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0
1. Have a second person remove packaged Sterile Touchpen from the dispenser and pull
apart the opening flaps to expose the handle.
2. With the second person holding the opening flaps, remove Sterile Touchpen from the
packaging while holding the handle.
Always use the opening flaps, do not break through the sterile packaging with the
Sterile Touchpen.
The Sterile Touchpen is delivered sterile. If the Sterile Touchpen comes in contact with
an unsterile environment during unpacking or use, dispose of it immediately.
Figure 42
95