System Shutdown; Overview - Brainlab CURVE DUAL System User's Manual

System Shutdown

5.3 System Shutdown
5.3.1

Overview

How to Shut Down
Steps
How to Reset
Step
To reset the computer (if system has frozen or has not completely shut down) press on/off button
a
Waiting Periods
Emergency
90
1. Shut down system using the software or by pressing on/off button
2. When the standby LED turns off, shut off mains power switch
3. When the power LED turns off, unplug and secure all cables, storage devices and MP3
players.
4. If applicable, unplug the mains power cable from the Camera Cart - Curve Dual Display.
The on/off button does not disconnect the Monitor Cart from mains voltage. Use the
mains power switch and unplug mains power cable to ensure complete voltage dis-
f
connection.
Using the mains power switch before equipment has fully shut down may result in ir-
reversible loss of data.
Switch off mains power before connecting or disconnecting cables.
for five seconds.
When disconnecting the system from line voltage, wait at least 10 seconds before re-
connecting it.
Do not turn off system during boot-up. Otherwise, configuration files and other data
on hard disk may be damaged or lost.
In case of emergency only, use mains power switch and unplug detachable mains
power cable or to simultaneously disconnect all supply poles.
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0
briefly.
a
.
f