Cleaning Instructions; Overview - Brainlab CURVE DUAL System User's Manual

Cleaning Instructions

7.2 Cleaning Instructions
7.2.1

Overview

Before You Begin
No Automatic
Disinfection
No Sterilization
No Liquids If liquids come in contact with the foam surrounding the monitor frame and touchscreen, there may
be temporary adverse effects to touchscreen functionality.
Touchscreen functionality should return to normal after the foam has dried, however, is it recom-
mended to avoid having liquids come in contact with the foam, in particular during cleaning.
120
Ensure that the system is fully shut down and disconnected from mains power before
beginning cleaning.
Risk of electrical shock: Prior to and during all cleaning and disinfection work, ensure
that camera is disconnected from Monitor Cart.
Do not use automatic cleaning and disinfection procedures for Curve components.
Do not expose the Curve system to direct UV light, as it may damage equipment.
Do not sterilize Curve system components.
Do not spray cleaning solvents or other liquids directly into the speaker grids or air
vents.
Ensure that liquid does not enter the Curve components, as this could damage the
component and/or the electronics.
Use only a moist cloth for cleaning. Other methods could allow liquids to enter the
system and cause damage.
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0