Protection Cover For Monitors - Brainlab CURVE DUAL System User's Manual

Cleaning Instructions
7.2.3

Protection Cover for Monitors

Illustration
How to Clean
Steps
NOTE: If a soiled cover cannot be sufficiently cleaned using the above steps, exchange the cover
for a new one.
Do Not Use • Acid solvents
• Caustic solvents with pH value higher than 9.5
124
1. Remove protection cover(s) from Monitor Cart.
2. Use a surface disinfectant to clean the surface.
Follow disinfectant manufacturer's recommendations.
NOTE: Use only a moist cloth to clean surfaces. Do not allow the protection cover to be-
come soaked with disinfectant.
3. Clean the outside surfaces of the protection cover(s). Do not clean surfaces on the inside
of the cover.
4. Allow the protection cover(s) to fully dry before applying to the system.
Do not wash, soak, iron or sterilize protection covers.
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0
Figure 55