Safety Inspection - Brainlab CURVE DUAL System User's Manual

Inspections
2.5.4

Safety Inspection

Interval A safety inspection should be performed once a year.
Scope A safety inspection must include all items specified on the safety inspection form.
See the Technical User Guide for detailed information on safety inspections.
Inspections by
Non-Brainlab
Personnel
The test must be performed by a qualified engineer who:
• Is qualified to carry out safety inspections on electrical medical equipment
• Is familiar with the product safety information and product instructions, and has read and under-
• Is up-to-date with current local regulations regarding industrial and non-industrial accident pre-
• Informs Brainlab immediately in writing if the equipment is deemed unsafe
Inspections by • If a suitably qualified person is not available at the customer site, Brainlab support will perform
Brainlab Personnel
• Brainlab performs an inspection at the end of the warranty at no charge.
• If you require a Brainlab support specialist, contact Brainlab support.
How to Use the
Safety Inspection
Steps
Form
32
Only trained and skilled personnel are allowed to perform electrical safety tests.
stood the user guides
vention
this inspection for a set fee.
1. Copy the safety inspection form from the Technical User Guide.
2. Enter inspection results.
3. Keep it as a record of inspection.
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0